|
|
Digital Brushless Servo Drives
From 1 to 10 Ampere |
|
Description
The series 635 AC brushless is more than a servodrive. It is
a complete system in a single module. Each drive can be
operated in speed or position control without external axis
controller.
The motion controller is programmable in simple language
similar to "Basic" with the potential of 1500 program steps.
The motion controller is also programmable for the following
functions: Point to Point position control, electronic
gearing, master/slave and CAM profile.
The 635 can be controlled traditionally with digital and
analogue I/O, RS 232 serial communication or with one of the
various communication card options.
|
|
 Integral
options
Cam profile
Electronic gearing
Control
speed/position
Cut to length
Simple set-Up
and programming
Extremely
compact |
|
| |
AVAILABLE OPTIONS
EMC filter
Expansion I/O
via COM2
Expansion I/O
CanBus
Absolute
Encoder CanBus
Encoder
assoluto CanBus
Line reactors-
European market
Cables and
connectors
Communication
Options
RS 232/422/485
CanBus
CanOpen
Profibus-DP
Interbus
Suconet K
DeviceNet |
|
|
TECHNICAL
SPECIFICATIONS
Supply Power
Single Phase 220-240Vac
±10%
Three Phase 220-240Vac ±10%
50-60Hz ±5%
Ambient Temperature
0-40°C
Overload
200% for 10 seconds
150% for 20 seconds
125% for 40 seconds
Protection option
IP20 |
|
|
|
INPUTS/OUTPUTS
Analogue Inputs (2
total)
Reference speed/torque 12 bit 0/±10V
Current Limit10 bit 0/±10V o configurable
Analogue Outputs (2
total)
Speed 7 bit 0-10V
Current 7 bit 0-10V
Digital Inputs
(8 total, 2 fast 20µs)
24Vdc - Optoisolated / galvanic
(7 configurable + 1 Enable)
Digital Outputs
(5 total, 3 optoisolated configurable)
120mA max 60Vdc - Short circuit protected |
|
|
INTERNATIONAL CODE
The 635 series complies to
standard code when installed in accordance to
manufacturers installation manual.
EN50178
(Protection Low Voltage Directive)
EN50081-1 (1992)
(emissions per unit in ambient at 230V with EMC filter)
EN50082-2 (1995)
(immune in industrial EMC environment)
EN61800-3
(Standard EMC specifics per Drive)
EN61000-3-2
(Standard harmonics with line inuctors)
Complies with CE, UL
and c-UL |
|
