|
|
Digital Brushless Servo Drives
from 1 to 6 Ampere |
|
Description
The 631 Drive is a new generation of servo drives designed
with high performance in an extremely compact package.Each
unit comes with a built-in class "B" EMC filter, dynamic
braking block for high inertia loads and Axis control
module.
The motion controller is programmable in simple language
similar to "Basic" with the potential of 1500 program
steps..The motion controller is also programmable for the
following functions: Point to Point position control,
electronic gearing, master/slave and CAM profile.
The 631 can be controlled traditionally with digital and
analogue I/O, RS 232 serial communication or with Can Bus.
|
|
 Internal EMC
filter
Integral
options
Cam profile
Electronic gearing
Speed and position
control
Cut to length
Simple Set-Up
and programming
Extremely
compact |
|
| |
AVAILABLE OPTIONS
Operators
panel IBT CanBus
Expansion
module I/O CanBus
Absolute
encoder CanBus
Line reactors
for European market
Cables and
connectors |
|
|
TECHNICAL
SPECIFICATIONS
Supply Power
Single Phase 220-240Vac
±10%
50-60Hz ±5%
Ambient Temperature
0-40°C
Overload
200% for 10 seconds
150% for 20 seconds
125% for 40 seconds
Protection option
IP20 |
|
|
|
Inputs/Outputs
Analogue Inputs
1 a 12 bit 0-±10V
Digital Inputs
(4 total, 3 configurable) 24Vdc
Digital Outputs
(2 total, configurable), 60mA max 30Vdc
Short circuit protected |
|
|
INTERNATIONAL CODE
The 631 series complies to
standard code when installed in accordance to
manufacturers installation manual.
EN50178
(Protection Low Voltage Directive)
EN50081-1 (1992)
(emissions per unit in ambient at 230V with EMC filter)
EN50082-2 (1995)
(immune in industrial EMC environment)
EN61800-3
(Standard EMC specifics per Drive)
EN61000-3-2
(Standard harmonics with line inuctors)
Complies with CE, UL
and c-UL |
|
